Eltax AVR-320 Stereo Receiver User Manual


 
11
FRONT PANEL INFORMATION
1. POWER Turns the unit on/off. 12. AUX Press this button to select AUX.
2. STEREO Press this button to alternate between
Stereo and Mono mode when listen
to FM broadcast.
13.
TUNER/BAND
Press this button to select the TUNER.
Press again to select FM and AM.
3. STATION When using the Tuner press this button to
select a preset channel.
14. VIDEO 2 Press this button to select VIDEO 2.
4. APS Allocates and memorizes radio stations
automatically. (Note: Hold this button down
for more than 3 seconds to activate
15. VIDEO 1 Press this button to select VIDEO 1.
5. REMOTE
SENSOR
16. DVD Press this button to select DVD.
6. VOLUME To decrease or increase the Master
Volume.
17. DTS/DOLBY
DIGITAL
When playing 5.1CH source, and while you
are enjoying Stereo, press this button to
playback source in DTS/DOLBY DIGITAL.
7. VFD DISPLAY
UNIT
Informs you of selected inputs and system
state.
18. 2CH Select STEREO mode (Note: only
Front Left & Front Right and Woofer
speakers are activated).
8. PHONES Jack for stereo headphones. 19. DIGITAL IN Press this button when using a source
connected by a DIGITAL IN. Press it to
select : DVD COA. DVD OPT, VIDEO 1
OPT and VIDEO 2 OPT, or when using an
analog source.
9. STANDBY
INDICATOR
20. SURROUND
MODE
Select surround modes: MOVIE and
MUSIC.
10. TAPE Press this button to select TAPE. 21. SUB
ON/OFF
Press this button to turn on/off the
subwoofer.
11. RESET To reset the whole system to factory
defaults.