Filter
Top Products
19
File Management
FILE / FOLDER SEARCH
In CD, USB, SD/MMC mode, press the
*
/
AS/PS button to enter search mode.
Below is toggle sequence of search modes.
File Number Search > File Name Search >
Folder Search > Exit search mode
NOTE: Audio-CD Disc can only be searched
with File Number Search
FILE NUMBER SEARCH
To start the File Number Search
1. Press the
*
/AS/PS button and a 3 digit
number “001” appears on the LCD and the
digit on the right end is blinking.
2. Press the Volume - or Volume + button
to input a number (from 0 to 9) of the track
which you want to listen to, press SEL but-
ton will move to next digit.
When finished, press the #/BAND button to
play the track.
FILE NAME SEARCH
1. Press the
*
/AS/PS button twice and
“A**” is shown on LCD, the letter “A” will
be blinking.
2. Press the Volume - or Volume + button to
input a Letter from A to Z or Numbers from
0 to 9, press the SEL button to move to the
next digit.
3. Once you’ve entered up to 3 letters,
press #/BAND button to search for files that
contain those letters. Press the Volume - or
Volume + button to show the next searched
file.
If no file is found, “NO MATCH” is displayed
on LCD with returning to initial input ready
mode automatically.
Press #/BAND button to play after complet-
ing input.
FOLDER SEARCH
1. Press the
*
/AS/PS button 3 times.
2. If there are folders on the CD, USB, or
SD/MMC, the name of the first folder will
appear on the LCD.
3. Press the Volume + button or Volume -
button to change the folder.
4. Press the #/Band button to select the
folder shown on the LCD, and the first track
in the folder will start to play.
RECORDING (ENCODING) FUNCTION
The Recording (Encoding) function records
from the Tuner, CD, or AUX IN, directly to ei-
ther a USB Flash Memory or SD/MMC Card.
NOTE: If there are no Memory Devices in-
serted, LCD display shows “NO MEDIA”.
If there is not enough memory capacity “NO
SPACE” will be displayed on the LCD and the
recording will stop.
During recording a blinking “R” is displayed
on LCD.
RECORDING FROM TUNER / AUX-IN
With a USB flash memory or SD/MMC card
inserted into the unit.
1. Press and hold the 0/DISP button for more
than 2 seconds and recording will start.
NOTE: If both the USB and SD memory are
inserted into the unit at the same time, you
must choose which memory to save the re-
cording on, the “SD/MMC Card” or “USB
Flash Storage Device” by pressing the No.
0/DISP button again.
2. Press the No. 0/DISP button for more
than 2 seconds to stop the recording.
RECORDING FROM AN AUDIO CD
Press the No. 0/DISP button for more than
2 seconds and the unit asks for the location
to record in the following sequence.
MMC ALL > USB ALL > MMC ONE > USB
ONE > MMC ALL
MMC ALL: Record all tracks on the disc to
SD/MMC Card.
USB ALL: Record all tracks on the disc to
USB Storage Device.
MMC ONE: Record current track to SD/
MMC Card.
USB ONE: Record current track to USB
Storage Device.
To cancel recording, press the No. 0/DISP
button for more than 2 seconds.
To start recording, press # / BAND button
and press again to stop recording.
USB/SD/MMC Card Operation