Elite VR500CS-BT Stereo Receiver User Manual


 
18
CD Operation (Cont)
to resume playback.
REPEAT
On the Remote or Face Plate, press the
No. 2/RPT Button to repeat the same
track continuously. “RPT” will appear on
the display. Press this button again to
stop repeating tracks
RANDOM
On the Remote or Face Plate, press the
No. 4/RDM Button to play all the tracks in
random order. “RDM” will appear on the
display. Press this button again to stop
random play.
UP 10
Press the No. 6/UP10 Button to advance 10
tracks at a time.
DN 10
Press the No. 5/DN10 Button to go back 10
tracks at a time.
USB & SD/MMC
USB FLASH MEMORY
To play MP3/WMA files from a USB flash
memory, insert a USB flash memory into the
USB port on the left side of the unit. The
unit will start playing MP3/WMA files on the
USB flash memory automatically. Or press
the MODE Button to select USB after press-
ing POWER Button to turn on the unit.
SD/MMC
To play MP3/WMA files from a SD/MMC
Card, insert a SD/MMC Card into the SD
Card Slot on the left side of the unit. The
unit will start playing MP3/WMA files on the
SD/MMC Card memory automatically. Or
press the MODE Button to select SD/MMC
Card after pressing POWER Button to turn
on the unit.
PAUSE/PLAY
Press the No. 1/PAU Button to pause play-
back. Press the Button again to resume.
SELECTING TRACKS
If the MP3/WMA files are stored in folders on
the USB drive or SD Card, the unit will start
by playing the first song in the first folder.
After playing all the files sequentially in the
first folder, the unit will play sequentially all
of the files in the next folder. The unit will
continue playing through all of the folders
on the USB drive or SD Card in this manner.
If the USB drive or SD Card has loose files
and folders containing files, it will play the
loose files sequentially, then it will play the
files in the folders sequentially.
SCANNING TRACKS
On the Remote or Face Plate, press the
2/INT Button to play the first 10 seconds
of each track. Press this button again to
resume playback.
REPEAT
On the Remote or Face Plate, press the
No. 2/RPT Button to repeat the same
track continuously. “RPT ON” will appear
on the display. Press this button again to
stop repeating.
RANDOM
On the Remote or Face Plate, press the
4/RDM Button to play all the tracks in
random order. “RDM ON” will appear
on the display. Press this button again
to stop random play.
+ 10
Press the No. 6/UP10 Button to advance
10 tracks at a time.
- 10
Press the No. 5/10DN Button to go back 10
tracks at a time.