Elite VR500CS-BT Stereo Receiver User Manual


 
17
CD Operation
DISC SLOT
Press the OPEN button to open the face-
plate, then insert a disc into the disc slot.
As the disc is read TOC READ will appear
on the LCD, then the first track will start to
play.
• If there is error, “CD ERROR” will be dis-
played on LCD. In order to avoid CD ER-
ROR, please use good quality discs and
keep the discs clean.
• Supported Disc Types: Audio CD/ CD-R/
CD-RW, MP3 / WMA.
• If a disc can not be inserted, there may be
another disc inside the unit. Eject the disc in
the unit, then insert the new disc.
DISC EJECT
Press the OPEN button to open the face-
plate, then press the Eject button to eject
the disc from the CD slot. If disc is not re-
moved after ejecting, then the disc auto-
matically re-loads without playing.
SELECTING TRACKS
On the Remote or Face Plate, press the >>|
Button to advance CD to the next track.
Track numbers will be shown on the display.
Press and hold >>| Button to fast forward.
Press the |<< Button to go to a previous
track. Track numbers will be shown on the
display. Press and hold the |<< Button to
fast reverse. Disc will play normally when
the >>| or |<< Button is released.
PLAY/PAUSE CD
On the Remote or Face Plate, press the No. 1 /
PAU Button to pause the CD.
Press the button again to resume play-
back.
REPEAT
On the Remote or Face Plate, press the No. 2 /
RPT Button to repeat the same track continu-
ously. “RPT ON” will appear on the display.
Press this button again to cancel the repeat
function.
SCANNING TRACKS
On the Remote or Face Plate, press the
No.
3 /
INT Button to play the first 10 seconds of each
track. Press this button again to resume play-
back.
RANDOM
On the Remote or Face Plate, press the
No.
4 /
RDM Button to play all the tracks in random or-
der. “RDM ON” will appear on the display. Press
this button again to stop random play.
MP3/WMA on
CD
INSERT/EJECT CD
Insert a disc with MP3 and/or WMA files
into the CD slot with label side up. The word
“TOC READ” will be displayed as the CD
is loaded. The first file in the first folder will
start to play, and any ID3 information will be
displayed.
EJECT
Press the EJECT Button to eject the disc
from the slot. If the disc is not removed from
the slot within 5 seconds, it will automati-
cally be loaded into the slot again. When
the disc is ejected and removed, the unit
will automatically switch to Radio Mode.
SELECTING TRACKS
On the Remote or Face Plate, press the >>|
Button to advance CD to the next track.
Track numbers will be shown on the display.
Press and hold >>| to fast forward.
Press the |<< Button to go to a previous
track. Track numbers will be shown on the
display. Press and hold the |<< Button to
fast reverse. Disc will play normally when
the >>| or |<< Button is released.
PLAY/ PAUSE CD
On the Remote or Face Plate, press the No. 1 /
PAU Button to pause the CD.
Press this button
again to resume playback.
INTRO
On the Remote or Face Plate, press the
No.
3/INT Button to play the first 10 sec-
onds of each track. Press this button again