Filter
Top Products
CONTROLS AND DISPLAY
12
Option Switches - The five front panel option switches can be
programmed by your system operator to the functions listed below. Refer
to the section indicated for more information on a function. The keycap
usually indicates the function controlled by the switch.
A/D - Scan list add/delete (see page 37)
CG - Call Guard squelch disable (see page 52)
EMER - Emergency switch (see page 26)
ENCPT - Encryption on-off (see page 27)
FCN - Function select (see following description)
HORN - Horn alert on-off (see page 28)
MON - Monitor mode on-off (see page 42)
AUX - Option select (see page 29)
PRI - Priority sampling on-off (see page 53)
SCAN - Scan on-off (see page 35)
STLH (AUX) - Stealth mode select (see page 31)
TA - Talk-around on-off (see page 52)
(Blank) - Not used (disabled)
FCN (Function) Switch - This switch (if programmed) selects the
following functions:
Menu Mode Select
- Press FCN twice (see page 32)
Home Sys/Grp Select
- FCN/press Select switch (see page 28)
Conv Squelch Set
- FCN/rotate Select switch (see page 18)
Transmit/Busy Indicator - Indicates the following conditions:
Red
- Transmitter keyed, normal power output
Orange
- Transmitter keyed, power reduced because internal
temperature is high
Green
- Busy conventional group (channel). Refer to “Conventional
Operation” on page 41 for more information.
Microphone Jack - Connection point for the microphone.
Microphone Push-To-Talk (PTT) Switch (Not Shown) - Push-button on
the microphone which is pressed to key the transmitter.