Filter
Top Products
8 – CLA37
CLA37– 9
4. CONNECTIONS
WARNING: To prevent the risk of electric shock, do not connect the loudspeaker
with the amplier switched on. The protective cover over the terminal strip
is a safety feature per CE requirements. Replace this cover after making the signal
connections.
1. Remove the insulating cover from the loudspeaker input
terminal strip.
2. The positive (+) input terminal of the loudspeaker connects
to the positive (+) output of your power amplier.
3. The negative (–) terminal of the loudspeaker connects to
the negative (–) output of your power amplier.
4. Using a small phillips screwdriver, secure the connections.
5. Replace the insulating cover over the loudspeaker input
terminal strip.
CAUTION:
SUSPENDING THIS SYSTEM SHOULD BE DONE BY QUALIFIED
TECHNICIANS FOLLOWING APPROPRIATE SAFETY STANDARDS
--
+
IN
P
UT
Bracket Dimensions
4x
11
mm dia
1.50"
(38.1)
3.50"
(89)
3.00"
(76.2)
6.00"
(152.4)
8.00"
(203.2)
25.57"
(649.6)
22.00"
(558.8)
26.57"
(675)
25.08"
(637)
10.00"
(254)
3.43"
(87.16)
3.67"
(93.2)
1.00"
(25.4)
2x 8 mm dia
0.70"
(17)
4.14"
(105.1)
9x 8 mm dia)
NOTES:
UNLESS WHERE SPECIFIED:
1. DIMENSIONS ARE IN INCHES,
DIMENSIONS IN BRACKETS ARE MILLIMETERS.
2. DIMENSION TOLERANCE ± 0.03" (0.8 MM)
Wall bracket
Fly bracket
Connecting bracket