4 – CLA37
CLA37– 5
3. INSTALLATION
Unpacking and Inspection
Visually inspect the outside of the shipping carton and check for any damage. After
unpacking, if you nd concealed damage to the loudspeaker, save the packing materials for
the carrier’s inspection, notify the carrier immediately, and le a shipping damage claim.
Although EAW Commercial will help in any way possible, it is always the responsibility of
the receiving party to le any shipping damage claim. The carrier will help prepare and le
this claim.
Mounting Precautions
The mounting bracket provided can be used for wall mounting the loudspeaker.
WARNING: Installation should only be done by an experienced technician.
Improper installation may result in damage to the equipment, injury or death. Make
sure that the loudspeaker is installed in a stable and secure way in order to avoid any
conditions that may be dangerous for persons or structures:
• Check to make sure that the support surface (e.g., wall, etc.) has the necessary
mechanical characteristics to support the weight of the loudspeaker without the
danger of it falling.
• Always use support elements suitable for the material of the wall that will support
the loudspeaker (e.g., screw anchors for bricks, screw anchors for cement, etc.). Due
to various construction methods and materials used today, the hardware for securing
the bracket to the mounting surface is not supplied. Consult a building professional
for the proper mounting hardware before mounting the bracket.
• Before suspending the loudspeaker, carefully check all the components to be used to
make sure there is no damage, deformation, corrosion and/or missing or damaged
parts that could reduce the safety of the installation.
• Consult a professional rigger or structural engineer prior to suspending loudspeakers
from a structure not intended for that use. Always know the working load limit of the
structure supporting the loudspeaker. Always make sure that the rigging hardware
minimum rating is at least ve times the actual load.
• Avoid installing the loudspeaker in places exposed to harsh weather conditions.