Filter
Top Products
XJ-300FR Manual 11Specifications are subject to change without notice
Linking 2 XJ-300FRs
The XJ-300FR’s ingenious design lets the user link two amplifiers together
depending on the desired channel set-up.
1) Match the bolts on the left side of one amp with the linking holes on the
right side of the other amp.
2) Once they are connected, push the right amp forward while pushing
the left amp backwards until they are locked together. They are linked
correctly when the faceplates are flush.
3) Bracket the backplates of the amps together for added reinforcement.
1
2
1
WHEN LINKING THE AMPS, DO NOT APPLY PRESSURE
ONTO THE FRONTPLATES OR BACKPLATES. THIS
COULD DAMAGE THE TERMINALS, KNOBS, OR TOGGLE
SWITCHES. AMPS DAMAGED IN THIS WAY ARE NOT
COVERED BY THE WARRANTY.
3