Dual XDVD8181 Stereo Receiver User Manual


 
XDVD8181 OPERATION
17
Press BAND to increment from FM1, FM2, FM3, AM1] FM1.
Press AS/PS for 1 sec to start station PRESET SCAN function, the unit will
now scan your program presets for 5 secs for each preset in that band, press
again to stop scanning, the front LCD panel will flash while in this mode.
Press AS/PS for 2 secs to start AUTO STORE station preset function in
current BAND.
Press the DISP button to display CLOCK information on the secondary LCD
screen when the monitor is closed.
Press OPEN to open or close the monitor. The unit will emit 1 confirmation
beep upon opening, 3 beeps when closing. Be careful not to not touch
or obstruct the monitor movement during the open/close sequence, or
permanent damage could occur.
Press once for DISC ejection.
Press to access MAIN menu, rotate clockwise/counter clockwise to select
desired item and press once to ENTER.
Press once to incrementally select desired source.
Selects the next chapter/track for playback.
Selects the previous chapter/track for playback
Stop playback of DVD / CD / MP3
Press once for PAUSE, press again for PLAY.
Fast forward the disc content.
Fast reverse the disc content.
Press once to MUTE audio, press again to return audio, an icon indicator will
flash on the TFT monitor.
Press VOLUME knob for 1sec to turn the unit on, the unit will beep twice.
Press and hold POWER for more than 2secs, unit will beep three times, then
turn off. NOTE: EJECT will still function even if POWER is off.
Rotate VOLUME rotary knob Q or P for desired VOLUME level, press
once to access the AUDIO SETUP MENU.
Turn VOLUME rotary to desired listening level, press and hold VOLUME
rotary knob for 3 seconds to program currently selected volume level.
General Operation
BAND
AS/PS
(Auto Store /Preset Scan)
DISP
OPEN
EJECT
ROTARY
MODE
TRACK UP
TRACK DOWN
STOP
PLAY/PAUSE
FAST FORWARD
FAST REVERSE
MUTE
POWER ON/OFF
VOLUME
PROGRAMMABLE TURN-ON
VOLUME