Dual XDVD8181 Stereo Receiver User Manual


 
XDVD8181 OPERATION
15
General Operation
Mode
Optional Mode Selection
Volume
Mute
Audio Adjustment
from front panel
Audio Adjustment
from Remote
Press MODE to select between TUNER, DVD, AV1, CAMERA, inputs. Modes of
operation are indicated in the OSD (On Screen Display) and secondary LCD.
With the monitor open, press the screen to display the OSD menu bar and
press TUNER, DVD, AV1 or CAMERA in the MAIN menu page to select the
desired source.
Adjust VOLUME using rotary encoder or the VOL buttons (00-40).
Press MUTE to silence the audio; MUTE will appear in the OSD.
Press MUTE again to cancel.
Press in VOLUME rotary knob on left front panel,
Press in VOLUME again to advance to desired parameter to be changed,
Turn VOLUME rotary Q or P to adjust to desired level,
Press in VOLUME to advance to next selection,
Press and hold the VOLUME button on the front panel to exit.
Press the SEL button,
Press the buttons on the remote to select an item to be adjusted,
Press or to adjust the desired setting,
Press the ESC button on the remote control to exit the audio control menu.
Note: The Bass and Treble levels are only adjustable when EQ is set to “User”
mode. The Loud function compensates for deficiencies in sound ranges at
low levels. When the Loud function is on, LOUD is displayed on the screen.
00
ITEM RANGE
EQ
USER FLAT
JAZZ POP
CLASSIC ROCK
NEWS URBAN
MOVIE TECHNO
BASS -7 +7
TREBLE -7 +7
FADE -7 +7
BALANCE -7 +7
SUB -7 +7
LOUD OFF ON
L
00
00
00
00
R
R
F
L