Filter
Top Products
20D-Link DCH-M225 User Manual
Section 3 - Web-based Conguration
To set up using the WPS method, select the rst option from the
setup wizard menu. Click Next to continue.
The DCH-M225 uses the push-button method for WPS. After
selecting WPS, the DCH-M225 will ask you to press the WPS push
button on the access point or router you want to connect the
DCH-M225 to. You have 120 seconds to press the button on your
access point or router. Click Next to continue.
If a connection has been successfully made, you will see a notice
on the screen and the LED on the device will turn solid green.
You can also use the WPS button on the side of the DCH-M225 to
initiate a WPS connection with the uplink router. After pressing
the WPS button on the DCH-M225, you will have 120 seconds to
press the WPS button on your access point or router. The LED on
the DCH-M225 will turn solid green when a connection has been
successfully established with the uplink router.
Using the WPS Method
WPS Button