Filter
Top Products
9
Connections
1. Connect two RF coaxial cables from the satellite dish to the SAT IN 1 and SAT IN 2 F-connectors.
2. If you have cable (CATV) or an off-air antenna, connect its RF coaxial cable to the ANTENNA IN jack.
3. Using the telephone cord (supplied), connect one end of it to a phone jack in your home. Connect the other end to
the PHONE JACK input on the rear of the DIRECTV
®
Multi-Room Receiver.To enjoy uninterrupted programming and
to order pay per view programs, the Receiver must be continuously connected to a land-based phone line.
4. Connect one end of the AC power cord (supplied) to the Receiver’s AC IN jack.
Antenna and Phone
Do not connect your receiver to the AC output before all other equipment is connected.
Caution
s
Unplug all equipment from the AC output before making connections.
Off-air antenna or
cable connection
SX660-2312 23/12/03 18:00 Page 9