Filter
Top Products
8
© 2002 Directed Electronics, Inc
1.
RRCCAA IInnppuutt JJaacckkss -
Accepts line level
outputs from head units or signal
processors at voltages between
150mV and 8 volts.
2.
RRCCAA SSyynncc OOuutt JJaacckk
- This RCA jack
sends a synced, or in-phase, gain
matched signal to a slave d2500.1
when connected in the Parallel
Synced Gain combination. (Refer to
Combined Amplifiers
section of this
guide.)
3.
RRCCAA SSllaavvee IInn JJaacckk
- This RCA
accepts input from a master
d2500.1 when connected in the
Parallel Synced Gain combination.
(Refer to
Combined Amplifiers
section of this guide.)
4.
SSllaavvee//MMaasstteerr SSwwiittcchh
- Controls
whether the amplifier is a slave or
master when connected in the
Parallel Synced Gain combination.
(Refer to the
Combined Amplifiers
section of this guide.)
5.
RReemmoottee SSuubb LLeevveell CCoonnttrrooll
- Controls
the subwoofer amplifier gain
controls from a remote location for
ease of adjustment during listening.
WWaarrnniinngg::
DO NOT connect a level control knob from other
manufacturers to the Remote Sub Level Control of
any Viper amplifier. Even though the connectors fit
properly, the control knob and connector pin posi-
tions may be different and the amplifier will be
damaged.
FRONT PANEL CONNECTIONS
FIGURE 1—AMPLIFIER CONNECTIONS d2500.1 FRONT
3
1
4
5
2