Filter
Top Products
11
© 2002 Directed Electronics, Inc
TOP PANEL CONTROLS
FIGURE 4—AMPLIFIER CONTROLS TOP
6
1.
IInnppuutt GGaaiinn AAddjjuussttmmeenntt
- Controls
the amplifier’s sensitivity and is
used to match the input level of the
amplifier to the output level of the
signal source.
2.
CCrroossssoovveerr FFrreeqquueennccyy AAddjjuussttmmeenntt
-
Adjusts the crossover point for the
on-board low-pass crossover.
3.
VVaarriiaabbllee BBaassss EEQQ
- Adds 0 to12db
of additional boost to the
subwoofer output when active.
4.
SSuubb PPhhaassee AAddjjuussttmmeenntt
- Controls
the phase of the subwoofer output
from 0 to 180 degrees.
5.
SSuubbssoonniicc FFrreeqquueennccyy AAddjjuussttmmeenntt
-
Adjusts the cutoff point for
SUBSONIC frequencies. Frequencies
below the adjustment point will be
attenuated by 24db per octave.
6.
VVaarriiaabbllee SSuubbssoonniicc FFiilltteerr SSwwiittcchh
-
Turns the Variable SUBSONIC filter
control on/off.
4
1
2
3
5