Filter
Top Products
AVALON RF, INC. Page 21 of 28
DX404/DX504/DX604 User’s Guide & Operating Manual
5.3.3 Antenna cables for the Digital Wireless Link (DWL)
The DWL antenna cable is a BNC to BNC cable with RG58 cable.
5.3.4 Splitters
When a set of four antennas feeds more than one receiver, it is
convenient to split the signal from each antenna to all receivers at the
same location.
There are two types of splitters: Passive and amplified. Passive are
lower cost and adequate for short range. Amplified splitters are costly
but offer better sensitivity.
Ordering information:
Splitter type
DX404/DX504
(F-F)
DX604
(SMA-SMA)
1 to 2 (two DX..4) SP2F SP2S
1 to 3 (three DX..4) SP3F SP3S
1 to 4 (four DX..4) SP4F SP3S
1 to 8 (eight DX..4) SP8F SP8S
5.3.6 Splitter to receiver cables.
The use of splitters requires jumper cables from every splitter output
to every receiver antenna input. For a four receiver
Ordering information:
Number of DX..4
Receivers
Number
of cables
DX404/DX504 DX604
2 8 CBLFF-2 CBLSS-2
3 12 CBLFF-2 CBLSS-2
4 16 CBLFF-2 CBLSS-2