Filter
Top Products
1 Can be selected when iPod CONTROL on the rear panel is
switched to “iPod (FRONT)” and the included iPod cable is
used.
2 Front IN can only be selected when a portable player is
connected.
3 Can be selected when iPod CONTROL on the rear panel is
switched to “AUX1 CONTROL” or “DOCK CONTROL” and an
Apple iPod Dock (sold separately) or and exclusive control
Dock for iPod (ASD-1R (sold separately)) is connected.
14
ENGLISH
Listening to radio broadcasts
• Noise may be produced in the sound when receiving AM broadcasts
if there is a monitor or other such device nearby. If so, move the S-
81 and monitor as far apart as possible.
Use BAND to select the reception band.
Use [SEARCH] to tune in the station.
• The “TUNED” indicator lights when a station is tuned in.
Selecting a radio station
Use
<
FUNCTION
>
or [TUNER] (FUNCTION) to select
“TUNER”.
• The reception frequency is displayed.
FM AUTO
FM MONO
AM
XM
2
3
1
¢FM station reception conditions
• When the reception mode is set to “FM AUTO”, the “ST”
indicator lights when a stereo broadcast is tuned in.
• If the signal is weak and the stereo broadcast reception is not
stable, set the reception band mode is set to “FM MONO”. The
“MONO” indicator lights.
¢Manual tuning
The reception frequency changes one step each time one of [6],
[7] is pressed.
Press [ENTER/MEMO] twice.
• The name input mode is set.
Use [
DD
] or [
HH
] to select the desired character.
Up to 8 characters can be input.
The characters that can be input are as shown below.
Use [
FF
] or [
GG
] to move the cursor.
Press [CLEAR] to delete characters.
Giving a name to the currently tuned in
broadcast station and presetting it
Tune in the broadcast station.
• The reception frequency is displayed.
2
3
1
•A total of 60 FM and AM broadcast stations combined can be
preset.
•Preset stations can be given names of up to 8 characters.
AB C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
^ ’ ( )
*
+ , – . / = (space)
(iPod)TUNERCD
(Front.IN)
AUX2
AUX1 (/iPod)
1
2
3
¢Auto tuning
If one of [6], [7] is pressed and held in, the next station is
searched for automatically.
Stations cannot be tuned in if their signal is weak.
•
To stop auto tuning
Press one of [6], [7].
Press [MENU/SET].
4
Use [
DD
] or [
HH
] to select the preset number, then press
[MENU/SET].
• The reception frequency and reception mode are preset.
5
[TUNER]
9
[
7
]
BAND
[SEARCH]
[
6
]
8
[
D
,
H
,
G
,
F
]
[MENU/SET]
[ENTER/MEMO]
8 <FUNCTION> 9
BAND
TUNING
<1/3>
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
[CLEAR]
[NUMBER]
(1~9, 0/10, +10)
[RDS]
ENGLISH