13
ENGLISH
Turning the power on
9
8
ON/STANDBY
[VOLUME]
[OPEN/CLOSE]
[SDB/TONE]
<VOLUME>
<5>
ON/STANDBY
8 9
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Basic Operation
Press ON/STANDBY.
When the power is turned on, the function that was being used
when the power was last turned off is selected (selector
function).
¢Turning the power off (to the standby mode):
Press ON/STANDBY again.
Loading discs
Press
<
5
>
or [OPEN/CLOSE] to open the disc tray.
( page 3)
¢To close the disc tray:
Press
<
5
>
or [OPEN/CLOSE] again.
NOTE:
• Be sure to turn on the power when opening and closing the disc
tray.
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
• Do not insert foreign objects into the disc tray. Doing so will
damage it.
•Information on the power indicator
•Power on ..................................Blue
•Standby mode...........................Red
•Low-power standby mode........Off ( ) ( page 21)
•Timer standby mode.................Orange
When in the low-power standby mode, a very small amount of
power is consumed, even if all the indicators are turned off.
Adjusting the volume
Turn
<
VOLUME
>
or press [VOLUME].
Adjusting the tone
To emphasize the low bass sound:
When “SDB ON/OFF” is displayed, use
88
or
99
to select “ON” or “OFF”.
Use [SDB/TONE] to select the tone parameter to be
adjusted.
1
TREBLEBASSSDB
S. DIRECT BALANCE
SDB: Adjusts the low bass sound.
BASS: Adjusts the bass sound.
TREBLE: Adjusts the treble sound.
BALANCE: Adjusts the left/right volume balance.
S. DIRECT: The sound is played with the tone flat.
2
-1
To adjust the bass or treble sound:
When “BASS” or “TREBLE” level is displayed, use
88
or
99
to adjust.
2
-2
To adjust the left/right volume balance:
When “BALANCE” is displayed, use
88
or
99
to
adjust.
2
-3
• The tone is only flat when “S.DIRECT” is selected. To adjust the
tone controls set a made other than “S.DIRECT”.
ENGLISH