Denon RCD-M38 CD Player User Manual


 
ENGLISH
22
4
Use [ui] to select the source, then press [ENTER/
MEMO]
or [p].
SOURCE SELECT
DISC
DISC TUNER AUX1 (AUX1/Dock)
USB AUX2
• “AUX1/Dock” is displayed only when control dock for iPod
is connected.
5
Only when the “TUNER” function is selected
Use [ui] to select the preset number, then press
[ENTER/MEMO] or [p].
• When no name has been registered for the selected preset
number, the frequency appears after the preset number is
displayed.
6
Use [ui] to select “hours” for the timer start time,
then press [ENTER/MEMO] or [p].
ON TIME
AM10:00>AM12:00
7
Use [ui] to select “minutes” for the timer start
time, then press [ENTER/MEMO] or [p].
ON TIME
AM10:30>AM12:00
8
Use [ui] to select “hours” for the timer stop time,
then press [ENTER/MEMO] or [p].
OFF TIME
AM10:30>AM11:00
9
Use [ui] to select “minutes” for the timer stop
time, then press [ENTER/MEMO] or [p].
OFF TIME
AM10:30>AM11:30
10
Use [o p] to select “ON” or “OFF” for the timer,
then press [ENTER/MEMO].
• The indicator lights
and the timer setting is
entered.
The timer settings are
displayed for 3 seconds.
ONCE TIMER0ON 1
EVERYDAY OFF
ONCE TIMER
ON
EVERYDAY 0OFF1
11
Press ON/STANDBY to set the power to standby.
Timer standby mode is set, and the power indicator lights
orange.
n Setting the timer to on or off
q Press [MENU].
w Use [ui] to select “TIMER ON/OFF” , then press [ENTER/
MEMO]
.
e Use [ui] to select “ONCE” or “EVERYDAY”.
r Use [op] to select “ON” or “OFF” for the timer, then press
[ENTER/MEMO]. The timer settings are displayed after this.
• When set to “OFF”, time operation is disabled, but the timer
settings remain unchanged.
n To check the timer settings
q Press [MENU].
w Use [ui] to select “TIMER ON/OFF” , then press [ENTER/
MEMO]
.
e When “ON” is displayed for the timer setting, press [ENTER/
MEMO]
.
The timer settings are displayed for 3 seconds.
n To change the timer settings
Perform the operations at “Setting the timer” (vpage21).
n To change the setting while setting the timer
Press [o].
The setting returns to the previous step. Display the setting you
want to change, then make the desired setting.
n When performing a timer setting with DENON
control dock for iPod (ASD-11R, ASD-3N, ASD-
3W, ASD-51N or ASD-51W)
Pause the track you want to play, and keep the power on for
DENON control dock for iPod.
Setting the timer
Setting the sleep timer
Use this function to automatically switch the power to the standby
mode after a specifi c amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps of 10 minutes.
Press [SLEEP] during playback and select the setting
time.
SLEEP 90 min SLEEP 80 min SLEEP 70 min
SLEEP 60 min SLEEP 50 min SLEEP 40 min
SLEEP 30 min SLEEP 20 min SLEEP 10 min SLEEP OFF
After about 5 seconds, the setting is entered and the display
returns to as it was before.
n Canceling the sleep timer
Either press [SLEEP] to select “SLEEP OFF” or press ON/
STANDBY
.
n To check the time remaining until the sleep
timer is activated
Press [SLEEP].