Filter
Top Products
ENGLISH
15
Getting Started Basic Connections
Advanced ConnectionsBasic OperationsBasic Operations Advanced Operations TroubleshootingExplanation terms Specifi cations Index
4
Input the station name.
Names of up to 8 characters can be input.
• [u, i] button ..................Selects the character.
• [p] button ........................Moves the cursor to the right.
• [CLEAR/DEL] button ......... Deletes the currently selected
character.
• Characters that can be input.
A ~ Z, 0 ~ 9, ^ ’ ( )
z
+ , - . / = (space)
• If you do not want to input a station name, press [ENTER/
MEMO]
without inputting anything else.
• If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
5
Press [ENTER/MEMO].
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 5.
Listening to preset stations
Use [NUMBER] (0 – 9, +10) or [CH –, CH +] to select the
preset number.
Setting the preset channels and changing
the received frequency on the main unit
<8/–, +/9> on the main unit can be used both for switching the
preset channel and for tuning.
Before operating them, switch the main unit to the “preset mode” or
“tuning mode” using the procedure below.
1
Press [MENU].
2
Use [ui] to select “TUNER SETUP”, then press
[ENTER/MEMO] or [p].
3
Use [ui] to select “MODE SELECT”, then press
[ENTER/MEMO] or [p].
n Giving station names to preset channels
Names of up to 8 characters can be input.
1
Tune in the preset channel you want to name.
2
Press [ENTER/MEMO] twice.
The display switches to the station name input display.
3
Input the station name.
Names of up to 8 characters can be input.
• [u, i] button .......................Selects the character.
• [p] button ............................. Moves the cursor to the right.
• [CLEAR/DEL] button .............. Deletes the currently selected
character.
• Characters that can be input.
A ~ Z, 0 ~ 9, ^ ’ ( )
z
+ , - . / = (space)
4
Press [ENTER/MEMO].
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.
Presetting FM/AM stations manually
This unit can be preset with a total of 99 FM and AM broadcast stations.
1
Tune in the station you want to preset.
2
Press [ENTER/MEMO].
The minimum number display “P– –” for the unregistered
preset fl ashes.
3
Use [NUMBER] (0 – 9, +10) or [CH –, CH +] to select
the number to be preset, then press [ENTER/MEMO].
The reception frequency and reception mode are preset and the
display switches to the station name input display.
NOTE
When the registered preset number is selected, “
*
” is
displayed.
To overwrite this preset number, press [ENTER/MEMO].
4
Use [ui] to select “PRESET MODE” or “TUNING
MODE”, then press
[ENTER/MEMO].
PRESET MODE
Press
<8/–, +/9> on the main unit to
switch preset channels.
• This is the same operation as [CH–, CH+] on the
remote control.
TUNING MODE
Press <8/–, +/9> on the main unit to
change the received frequency.
• This is the same operation as [TU–, TU+] on the
remote control.
Tuner playback