Filter
Top Products
13
ENGLISH
1
Press the MENU button.
TONE/SDB
ENTERDISPLAY MENU
SLEEPFOLDERTITLETIME
STOP
/BAND
PLAY/PAUSE
VOLUME
FUNCTIONMUTE
PRESET
+
-
1
2, 4
3
MENU
DisplayMode
MENU
2
Press the ENTER button.
ENTER
Normal?
MENU
3
Press the +/− buttons to
select the display
brightness.
Each time you press this
buttons, the display
changes as follows:
PRESET
+
-
Display brightness setting
4
Press the ENTER button.
• The setting is entered.
ENTER
1
Press the MENU button.
TONE/SDB
ENTERDISPLAY MENU
SLEEPFOLDERTITLETIME
STOP
/BAND
PLAY/PAUSE
VOLUME
FUNCTIONMUTE
PRESET
+
-
1
3, 5
2, 4
MENU
DisplayMode
MENU
2
Press the +/− buttons to
select “ECO Mode”.
PRESET
+
-
Eco-mode setting
Press the ENTER button.
ENTER
ECO Mode
MENU
ECO On/Off?
MENU
4
Press the +/− buttons to
make “On” or “Off”
flash.
The selected setting (“On”
or “Off”) switches each time
the +/− buttons is pressed.
The setting that is flashing is
the one that is selected.
PRESET
+
-
5
Press the ENTER button.
• The “MENU” indicator turns off
and the setting is completed.
ENTER
2 Be sure to set the current time beforehand.
3
7
MENU FUNCTION
2 Be sure to set the current time beforehand.
2 Various functions can be operated and various settings made using the menu function.
Press the + or − button after pressing the MENU button to perform the settings listed below.
Setting item
DisplayMode
[Display brightness
setting]
Setting details
Set the display’s brightness.
Select “Normal”, “Dimmer-1” or “Dimmer-2”.
Page
13
TimerSet?
[Timer time setting]
Use this to make the everyday timer
and once timer settings.
Timer Mode
[Timer mode setting]
17, 18
TimerOn/Off
[Timer ON/OFF setting]
Use this to turn the everyday timer and
once timer to “ON” or “OFF”.
18
TimerCheck?
[Timer setting check]
Use this to check the everyday timer and
once timer settings.
19
ClockAdjust
[Time setting]
Use this to set the current time. 14
TunerPreset
[Presettings]
Use this to store the reception band
and frequency at the number buttons.
Tuner Mode
[Tuner mode setting]
15
StationName
[Station name setting]
Use these to give names to
automatically set stations.
16
Eco Mode
[Eco-mode setting]
Use this for a lower power consumption in the standby mode.
Set to “On” or “Off”.
13
AutoOffMode
[Auto off mode setting]
This function can be used to automatically set the power to the
standby mode if the set remains in the stop mode for the set amount
of time with the function set to “CD”.
Set to “On” or “Off” and select the time (5, 10, 20 or 30 minutes).
14
2 The MENU button functions in both the
stop and play modes.
MENU
(RC-909)
2
Press the MENU button to cancel the
menu function currently being set.
2 To set the menu functions back to the default
values, press the FUNCTION and
1/3 buttons on
the main unit simultaneously, then within 3
seconds press the
2/BAND button.
“RAM CLEAR” is displayed for approximately 2
seconds and the values are reset to their defaults.
2 / BAND
(Main unit)
FUNCTION
(Main unit) (Main unit)
MENU
(RC-909)
Within
3 seconds
Normal? Dimmer-1? Dimmer-2?
NOTE:
The display and indicators remain off while the
standby mode is set in the eco-mode.
To turn on the power, press the ON/STANDBY
button on the CD receiver or the POWER button
on the remote control unit. (The auto power on
function does not work.)