Denon AVR-983 Stereo System User Manual


 
46
[5]Checking the currently playing program source, etc.
1
On screen display
Each time an operation is performed,
a description of that operation
appears on the display connected to
the units VIDEO MONITOR OUT
jack. Also, the units operating status
can be checked during playback by
pressing the remote control units ON
SCREEN/DISPLAY button.
Such information as the position of
the input selector and the surround
parameter settings is output in
sequence.
Front panel display
Descriptions of the units operations
are also displayed on the front panel
display. In addition, the display can be
switched to check the units
operating status while playing a
source by pressing the STATUS
button.
(Main unit)
1
Using the dimmer function
Use this to change the brightness of the display.
The display brightness changes in four steps
(bright, medium, dim and off) by pressing the
main units DIMMER button repeatedly.
1
(Main unit)
(Remote control unit)
Multi-source recording/playback
[1]Playing one source while recording another (REC OUT mode)
1
Press the ZONE2/REC button.
2
With RECOUT SOURCE displayed,
turn the FUNCTION knob to select the
source you wish to record.
The REC indicator and the
indicator of the selected source
light.
FUNCTION
3
Set the recording mode.
For operating instructions, refer to the manual of the
component on which you want to record.
4
To cancel, turn the function knob and select SOURCE.
When SOURCE is selected, the REC indicator turns
off.
FUNCTION
22,4
1
VCR -1 -2 V.AUX / TAPE
PHONO CD TUNER DVD / VDP TV / DBS
2
REC
RECOUT SOURCE
Display
NOTES:
Recording sources other than digital inputs selected in the REC
OUT mode are also output to the Zone 2 preout jacks.
Digital signals are not output from the REC SOURCE or audio
output jacks.
(Main unit)
(Main unit)
(Main unit)