Denon AVR-983 Stereo System User Manual


 
24
Setting the Video In Assignment
This setting assigns the color difference (component) video input jacks of the AVR-2803/983 for the different input sources.
1
At the System Setup Menu select Video In Assignment.
2
Switch to the Video In Assignment screen.
3
Select the component (Y, P
B/CB
and PR/CR) video input terminal to be assigned to the input source.
Select NONE for sources for which the component (Y, P
B/CB and PR/CR) video input is not to be used.
When the default, Yes, is selected, the settings are reset to the factory defaults.
4
ENTER the setting.
The System Setup Menu reappears.
q Input source selection w Component video terminal selection
Setting the Dolby Digital Setup
Sets the down-mixing method when not using a center speaker or surround speakers.
OFF: The dynamic range is not compressed.
ON: The dynamic range is compressed automatically according to the combination of speakers being used.
1
At the System Setup Menu select Dolby Digital
Setup and press the ENTER button.
2
Select ON if you want to use the Compression, OFF if you do not
want to use it.
NOTE:
When not using a center speaker or surround speakers, the sound is
played from the front speakers. If the sound should seem distorted
because the input level exceeds the allowable input for the front
speakers, set Compression to ON.