Denon AVR-983 Stereo System User Manual


 
25
3
Enter the setting.
The System Setup Menu reappears.
[1] Setting the power amplifier assignment
Make this setting to switch the power amplifier for the surround back channel to ZONE2.
If ZONE2 is selected, the signal that selected at ZONE2 is output at SURR. BACK/ZONE2 PREOUT terminals.
1
At the System Setup Menu select Zone2 Control
and press the ENTER button.
Setting the ZONE2 Control
2
The Zone2 Control screen appears.
Select Power Amp Assignment and press the
ENTER button.
3
Select Surround Back to use as the surround back
channel, Zone2 to use as Zone 2 out.
When Surround Back is selected When Zone2 is selected
4
Enter the setting.
At the Zone2 Control screen, select Exit and press the ENTER button.
The System Setup Menu reappears.
[2] Setting the Zone2 vol. level
Set the Zone 2 pre-out output level adjustment.
1
At the System Setup Menu select Zone2 Control
and press the ENTER button.