Denon 3802 Stereo System User Manual


 
42
ENGLISH
17
SPECIFICATIONS
2 Audio section
Power amplifier
Rated output: Front: 105 W + 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W + 150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Center: 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Surround: 105 W + 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W + 150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Surround back: 105 W + 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W + 150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Dynamic power: 140 W x 2 ch (8 /ohms)
210 W x 2 ch (4 /ohms)
240 W x 2 ch (2 /ohms)
Output terminals: Front, Center, Surr. Back/Multi Zone: 6 ~ 16 /ohms
Surround: A or B 6 ~ 16 /ohms
A + B 8 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, 3 dB (DIRECT mode)
S/N: 102 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
Digital
D/A output: Rated output 2 V (at 0 dB playback)
Total harmonic distortion 0.008% (1 kHz, at 0 dB)
S/N ratio 102 dB
Dynamic range 96 dB
Digital input: Format Digital audio interface
Phono equalizer (PHONO input REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
S-video jacks
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
C (color) signal 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
Color component video terminal
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
PB/CB (blue) signal 0.7 Vp-p, 75 /ohms
PR/CR (red) signal 0.7Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 27 MHz +0, 3 dB
2 Tuner section
[FM] (note: µV at 75 /ohms, 0 dBf=1 x 10
15
W) [AM]
Reseiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 80 dB
STEREO 75 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.4%
STEREO 0.5%
2 General
Power supply: AC 230 V, 50 Hz
Power consumption: 400 W
2 W (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm
Mass: 16.5 kg
2 Remote control unit (RC-884)
Batteries: R6P/AA Type (three batteries)
External dimensions: 61 (W) x 230 (H) x 34 (D) mm
Mass: 200 g (not including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.