Filter
Top Products
ENGLISH
22
ENGLISH
Basic Operation Basic Operation
Play a program source with the or
symbol.
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
• The DTS indicator lights when
playing DTS sources.
Operate the SURROUND BACK button
to switch Surround Back CH ON/OFF.
• The SURROUND BACK indicator
lights when the SURROUND BACK
button is on.
Lights
Lights
4
Lights
2 Surround parameters w
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
• TONE DEFEAT setting
5
Press the SURROUND PARAMETER button to
select the various parameters.
The parameter switches as shown below each time the
button is pressed.
CINEMA EQ
D.COMP.
SURROUND BACK
LFE TONE DEFEAT
DEFAULT
If you do want the bass and treble to be adjusted, turn off
the tone defeat mode.
TONE DEF. ON
ON OFF
• SURROUND BACK SPEAKER setting
SB : MTRX ON
MTRX ON NON MTRX OFF
This parameter is displayed during DOLBY DIGITAL playback.
• DEFAULT setting
Dolby Digital mode and DTS surround
(only with digital input)
1
Select an input source set to digital (COAXIAL/
OPTICAL) ( page 42).
Example: DVD
(Main unit) (Remote control unit)
6
Turn the SELECT knob, and press the CURSOR
FF
or
GG
button to set the various surround
parameters.
The mode switches as shown below each time the button
is pressed.
• CINEMA EQ setting:
CINEMA EQ OFF
ON OFF
7
Press the ENTER button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
DEFAULT Y/N
YES Y/N NO
Select “YES” to reset to the factory defaults.
LFE 0dB
-10dB -5dB 0dB
• D. COMP. setting
D.COMP. OFF
OFF LOW MID HIGH
This parameter is displayed during DOLBY DIGITAL playback.
• LFE setting
3
Press the STANDARD button to select the
STANDARD (Dolby/DTS Surround) mode.
2
Press the INPUT MODE button to set the input
mode to “AUTO” or “DTS”.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.