Filter
Top Products
8
ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA
Connect Preparation PlaybackSetup
8
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
3
Use ui to select a speaker, and use
o p to adjust the sound volume of
each speaker to be equal.
Front L / Center / Front R / Surround R /
Surround L / Subwoofer
A test tone is output from the selected
speaker. While listening to the test tone,
adjust the output from the selected speaker
so that it matches the sound output from the
other speakers. Ideally, all speakers should
provide the same sound output.
•–12.0dB – +12.0dB (0.0dB) : Adjust the volume.
•When o is pressed while the subwoofer volume
is set to “–12 dB”, the “Subwoofer” setting
switches to “Off”.
•When “Levels” is adjusted, the adjusted values
are set for all the surround modes. To adjust
the channel level separately for the different
surround modes, use the operation see vm
page 27 “Adjusting the volume of the speakers”.
NOTE
•Speakers set to “None” in the “Speaker Config.”
(vpage6) settings are not displayed.
•When a headphones plug is inserted in the
PHONES jack of this unit, the “Levels” is not
displayed.
•While speaker level settings can be
accomplished by listening to the test tones and
switching between the speakers and making
adjustments, a sound pressure level meter can
aid in the process. You might also be able to
use your smartphone as a sound pressure level
meter by downloading a sound pressure level
app from your smartphone app source.
4
Press ENTER to enter the setting.
Test Tone Start
Set Defaults
1
Levels
Enter ReturnENTER
BACK
Set Defaults
The “Levels” settings are returned
to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
5
Press BACK.
Speaker Config.
Distances
Levels
Crossovers
Bass
Test Tone Start
Set Defaults
Speakers
Enter ReturnENTER
BACK
Levels
1
Use ui to select “Crossovers”, and
then press ENTER.
Speaker Config.
Distances
Levels
Crossovers
Bass
Front
Center
Surround
Speakers
Enter ReturnENTER
BACK
Front
Center
Surround
80Hz
80Hz
80Hz
1
Crossovers
Enter ReturnENTER
BACK
Crossovers
1
Use ui to select “Levels”, and then
press ENTER.
Speaker Config.
Distances
Levels
Crossovers
Bass
Test Tone Start
Set Defaults
Speakers
Enter ReturnENTER
BACK
Test Tone Start
Set Defaults
1
Levels
Enter ReturnENTER
BACK
2
Press ENTER.
Output test tone.
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Front L
Center
Front R
Surround R
Surround L
Subwoofer
1
Levels
Enter ReturnENTER
BACK
Default settings are underlined.
vSee overleaf