Filter
Top Products
2
ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA
Preparation Setup PlaybackConnect
What you need for this step
Speaker
(sold separately)
Subwoofer
(with built-in amplifier)
(sold separately)
TV
(with HDMI input)
(sold separately)
FL FR
SL SR
C
Speaker cable
(sold separately)
Subwoofer cable
(sold separately)
HDMI cable
(sold separately)
•Prepare enough for the
number of speakers you will
use.
Speaker cable label
(supplied)
Remote control unit
(supplied)
R03/AAA batteries
(supplied)
This unit can perform 2.0-channel (two speaker stereo), 2.1-channel (two speakers and a subwoofer) and 5.1-channel (five speakers and a subwoofer) playback.
Here, we explain the installation and connection procedure when using 5.1-channel speakers.
For the installation procedure when using other than 5.1-channel, see vm page 23 “Installation/connection/setup of speakers (Advanced)”.
n Do not plug the power plug of the main unit into the wall socket until these preparations are complete.
n For operation of the connected devices, refer to the user manuals for each device.
Connecting the speakers
Install
n Typical 5.1-channel surround sound speakers layout
FL FR
SW
C
SL
SR
z1
z2
Listening position
z1 22˚ – 30˚ z2 120˚
FL Front speaker (L) •Use the illustration below as a guide for how
high each speaker should be installed. The
height does not need to be exactly the same.
Front
speaker
Surround
speaker
2 – 3 ft /
60 – 90 cm
GViewed from the sideH
FR Front speaker (R)
C Center speaker
SW Subwoofer
SL Surround speaker (L)
SR Surround speaker (R)