Filter
Top Products
ENGLISH
42
• Operating the surround mode and surround parameters from the main unit‘s panel.
1
Turn the SELECT knob to select the surround mode.
SELECT
• When turned clockwise
1
DIRECT
1
STEREO
1
DOLBY PRO LOGIC
1
5CH STEREO
1
MONO MOVIE
0
MATRIX
0
VIDEO GAME
0
JAZZ CLUB
0
ROCK ARENA
• When turned counterclockwise
0
DIRECT
0
STEREO
00
5CH STEREO
0
MONO MOVIE
1
MATRIX
1
VIDEO GAME
1
JAZZ CLUB
1
ROCK ARENA
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 44.
SURROUND
PARAMETER
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
(Main unit)
(Main unit)
*
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
then operate the selector.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK, ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
SURROUND
MODE
(Main unit)
DOLBY PRO LOGIC