Filter
Top Products
ENGLISH
37
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) together. Use it for
example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1
Select “FADER”.
CH.VOL
CH SELECT
ENTER
(Main unit) (Remote control unit)
2
Press the button to reduce the volume of the front
channels, the button to reduce the volume of the rear
channels.
The channel switches in the order shown below each time
this button is pressed.
*
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
*
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
Dolby Surround Pro Logic mode
1
Select the Dolby Surround Pro Logic mode.
• The Dolby Pro Logic indicator lights.
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
This is only displayed when setting the fader control.
SURROUND
MODE
(Main unit) (Remote control unit)
DOLBY / DTS
SURROUND
Light
NOTE:
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3CH. LOGIC). The AVR-2801/981 sets
the mode automatically according to the types of speakers set
during the system setup process (page 15).
SPEAKER
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH STEREO STEREO
INPUT MODE
ANALOG EXT.IN
MASTER VOL.
VOLUME DISC SKIP+
1
FL
1
C
1
FR
1
SR
1
SL
1
FADER
1
SW
1
1
SPEAKER
TUNING
BAND
TITLE
MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH STEREO STEREO
INPUT MODE
ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
CDR/MDDECK
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
ENTER
2
SELECT
SELECT
(Main unit) (Remote control unit)