Filter
Top Products
ENGLISH
Input Mode
Set the input mode for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 32, 33).
[Input source]
TUNER
[Selectable items]
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
XM
[Selectable items]
AUTO
: Automatically detect input signal and perform playback.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
CD
AUX
CDR
DVD/HDP
TV/CBL
VCR
V.AUX
[Selectable items]
AUTO
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
Rename
Change the display name for this source.
Names containing up to 5 characters can be input.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! # % & ’ ( ) * + , - . / : ; = ” ? @ [ \ ] (space)
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
• With HDMI, the video and audio signals are transferred
simultaneously. When HDMI is assigned to an input source, the
audio signal switches to HDMI along with the video signal. To use
with the digital audio input connectors assigned, set menu “Input
Mode” to “AUTO”.
• When the AVR-1908 and monitor are connected with an HDMI cable,
if the monitor is not compatible with HDMI audio signal playback,
only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
Assign
Assign input sources to input connectors.
HDMI
Select HDMI connector to assign to this source.
[Input source]
DVD/HDP
TV/CBL
VCR
V.AUX
[Selectable items]
HDMI1
: Assign HDMI1 input connector.
HDMI2
: Assign HDMI2 input connector.
None
: No HDMI input connector assigned.
Input source DVD/HDP TV/CBL VCR V.AUX
Default
setting
HDMI1 HDMI2 None None
Operating from the main unit or main remote
control unit
GOperation on the main unitH
n Selecting the “AUTO”, “PCM” or “DTS” mode
Press the INPUT MODE button.
AUTO PCM DTS
n Selecting the analog mode
Press the ANALOG button.
n Selecting the EXT.IN mode
Press the EXT.IN button.
GOperation on the main remote control unitH
Press the INPUT button.
AUTO PCM DTS
AnalogEXT. IN
• Only set “PCM” and “DTS” when playing the respective signals.
• When a digital signal is properly input, the “ ” indicator lights
on the display. If the “ ” indicator does not light, check the
digital input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
1.AVR1908E3_ENG_109.indd 35 2007/10/05 16:32:35