Denon AVR-1907 Stereo Receiver User Manual


 
Connecting Other Sources Connecting Other Sources
14
ENGLISH
ENGLISH
Signals input to the AVR-1907
VIDEO signal
input terminal
(yellow)
E
C
E
C
1
2
3
4
S-Video signal
input terminal
E
E
C
C
Video signal output to
VIDEO MONITOR OUT
terminal (yellow)
C
C
C
C
On screen display signal output
(C: Signal E: No signal) (C: On screen signals output E: On screen signals not output)
Video signal output to
S-Video MONITOR OUT
terminal
C
C
C
C
On screen display signals
Video signal output to Component
(Color Difference) Video MONITOR
OUT terminal
C
C
C
C
With the AVR-1907, the Video signal and the S-Video signal which
were inputted are mutually converted. And also the Video signal and
the S-Video signal which were inputted are converted into a higher
quality.
The flow of the video signals.
AVR-1907’s input
terminals
AVR-1907’s output
terminals
(Component Video
terminals)
(Component Video
terminals)
(S-Video terminal)
(Video terminal)
The video conversion function
(S-Video terminal)
(Video terminal)
Cautions on the video conversion function:
When the component video terminals are used to connect the
AVR-1907 with a TV (or monitor, projector, etc.) and the video
(yellow) or S-Video terminals are used to connect the AVR-1907
with a VCR, depending on the combination of the TV and VCR the
picture may flicker in the horizontal direction, be distorted, be out
of sync not display at all when playing video tapes.
If this happens, connect a commercially available video stabilizer,
etc., with a TBC (time base corrector) function between the AVR-
1907 and the VCR, or if your VCR has a TBC function, turn it on.