Filter
Top Products
System Setup System Setup
3
ENGLISH
ENGLISH
Setting the Video Convert Mode
Set whether or not to use the video conversion function.
ENTER <STATUS>D
H
F
G
SYSTEM SETUP
SURROUND PARAMETER
ENTER
SYSTEM SETUP
SURROUND
PARAMETER
D
H
F
G
[ON SCREEN]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
• Down-converting from the component video signal to the S-Video
and composite video signal is possible only when the resolution of a
component video signal is 480i / 576i.
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the “Video Convert Mode” to
“OFF”.
• When the video conversion function has been used, information
such as that of text broadcasts which has been added to the video
signal might not be output. If this happens, please set the “Video
Convert Mode” to “OFF”.
Press
DD HH
to select “Video Convert Mode”, then
press ENTER.
Press
DD HH
to select the input source, then press
FF GG
to set.
ON, OFF:
Select “ON” to use the video conversion function, “OFF” if you do
not want to use it.
Press ENTER.
2
3
4
2
3
Press
DD HH
to select “Video Setup” at the “System
Setup Menu”, then press ENTER.
1
The video conversion function
The AVC-A1XV is equipped with a function for up and down
converting video signals.
Because of this, the AVC-A1XV’s MONITOR OUT terminal can be
connected to the monitor (TV) with a set of cables offering a higher
quality connection, regardless of how the player and the AVC-A1XV’s
video input terminals are connected.
Generally speaking, analog video connections using the component
video terminals offer the highest quality playback, followed by
connections using the S-Video terminals, then connections using the
regular video terminals (yellow).
The flow of the video signals.
This unit’s input terminals This unit’s output terminals
(Component video
terminals)
(S-Video terminal)
(Video terminal)
(Component video
terminals)
(MONITOR OUT ZONE2)
(S-Video terminal)
(MONITOR OUT ZONE2)
(Video terminal)
(MONITOR OUT ZONE2)
(HDMI / DVI-D
terminals)
(HDMI / DVI-D
terminals)
: only MAIN ZONE 480i/576i
¢Cautions on the ZONE2 video conversion
function
There is no TBC (Time Base Collector) for ZONE2.
When the component video terminals are used to connect the AVC-
A1XV with a TV (or monitor, projector, etc.) and the video (yellow) or
S-Video terminals are used to connect the AVC-A1XV with a VCR,
depending on the combination of the TV and VCR the picture may
flicker in the horizontal direction, be distorted, be out of sync or not
display at all when playing video tapes.
If this happens, connect a commercially available video stabilizer, etc.,
with a TBC (time base corrector) function between the AVC-A1XV and
the VCR, or if your VCR has a TBC function, turn it on.
1.AVCA1XVE2_UP_ENG 06.4.6 1:26 PM Page 3