12
Network Audio Function Network Audio Function
ENGLISH
ENGLISH
• There are many Internet radio stations on the Internet. The
programs they broadcast and their bit rates vary widely.
Generally, the higher the bit rate, the higher the sound quality, but
streamed music or sound may be broken if the communication lines
or servers are busy. Inversely, programs with low bit rates have
lower sound quality but tend to be more stable.
• “Server Full” or “Connection Down” is displayed if the station is
congested or if it is not broadcasting.
•If you do not want the on screen display to be displayed while
playing Network Audio (internet radio or music server), set
“Function/Mode Status” at “Setting the On Screen Display” to
“OFF” (Refer to “Setting the On Screen Display (OSD)” for
operating instructions).
2
3
4
5
Listening to Internet radio
The required system connections and settings must be made in order
to listen to Internet radio.
“Update?” appears on the display when connecting to an Internet
radio station for the first time.
Use
<
FUNCTION
>
to select “AUX” or press
[
AUX
]
(AMP mode).
1
Press
DD HH
to select “Internet Radio”, then press
ENTER or
GG
.
• The initial screen when not connected to the Internet is
displayed.
2
Connecting to an Internet radio station for the first
time:
Press ENTER or
GG
.
3
Press ENTER or
GG
once again.
• The latest list of radio stations is downloaded from the vTuner
site. (Several minutes are required for this download.)
4
Press
DD HH
to select the desired setting item, then
press ENTER or
GG
.
Finally, the list of Internet radio stations is displayed and those
that can be played are indicated by the “
∗
” mark in front of
them.
5
Press
DD HH
to select the desired radio station, then
press ENTER or
GG
.
• Connection starts, and the station starts playing once the
buffer reaches “100 %”.
During playback, press ENTER once to pause playback, then press
ENTER again to resume playback.
If ENTER is pressed and held in for more than two seconds when
in the play or pause mode, playback stops and the previous menu
window reappears.
6
<FUNCTION>
ENTER
D
H
F
G
[AUX]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER D
H
F
G
1.AVCA1XVE2_UP_ENG 06.4.6 1:26 PM Page 12