Denon 483 Stereo Amplifier User Manual


 
Press the TUNING UP or DOWN button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
40
ENGLISH
Auto tuning
1
Set the input function to TUNER.
2
Watching the display, press the BAND button to select the
desired band (AM or FM).
3
Press the MODE button to set the auto tuning mode.
Lit
4
Press the TUNING UP or DOWN button.
Automatic searching begins, then stops when a station is
tuned in.
NOTE:
When in the auto tuning mode on the FM band, the STEREO
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the TUNED and
STEREO indicators turn off.
B
2
3 41
Manual tuning
1
Set the input function to TUNER.
2
Watching the display, press the BAND button to select the
desired band (AM or FM).
3
Press the MODE button to set the manual tuning mode.
Check that the displays AUTO indicator turns off.
4
NOTE:
When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the STEREO indicator turns off.