Denon 483 Stereo Amplifier User Manual


 
31
ENGLISH
NOTE:
When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Surround parameters q
Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and all
programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for
autosound music systems (no video), and is optional for A/V
systems.
The Pro Logic mode offers the same robust surround processing
as original Pro Logic in case the source contents is not of optimum
quality.
Select one of the modes (Cinema, Music or Pro Logic).
Panorama Control:
This mode extends the front stereo image to include the surround
speakers for an exciting wraparound effect with side wall
imaging.
Select OFF or ON.
Dimension Control:
This control gradually adjust the soundfield either towards the front
or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from
the center speaker; only from the left/right speakers as a phantom
image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
7
Set the various surround parameters.
CINEMA EQ setting
ON OFF
CINEMA EQ OFF
or or
PANORAMA setting
ON OFF
PANORAMA OFF
or or
DIMENSION setting
0 3 6
DIMENSION 3
or or
CENTER WIDTH setting
0
CENTER WIDTH O
4 7
or or
DEFAULT setting
Yes Y/N No
DEFAULT Y/N
or or
Stop pressing buttons once you have completed setting the
surround parameters. After several seconds the normal display
reappears and the settings you have made are automatically set.
Select Ye s to reset to the factory defaults.