Denon 483 Stereo Amplifier User Manual


 
29
ENGLISH
13
SURROUND
Before playing with the surround function
Before playing with the surround function, be sure to use the test tones to adjust the playback level from each speakers. This adjustment can
be performed from the remote control unit, as described below.
The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.
The adjusted playback levels for the different surround modes are automatically stored in the memory of each surround modes.
1
Set the DOLBY/DTS SURROUND (Dolby Pro Logic II or Dolby
Digital or DTS) modes.
2
Press the TEST TONE button.
T.TONE
RETURN
3
After completing the adjustment, press the TEST TONE
button again.
T.TONE
RETURN
(Main unit)
SURROUND
MODE
(Remote control unit)
(Remote control unit)
Test tones are output from the
different speakers. Use the channel
volume adjust buttons to adjust so
that the volume of the test tones is
the same for all the speakers.
(Remote control unit)
1
SURROUND
MODE
STATUS MUTING
T.TONE
MASTER
VOL
TITLE
DISC SKIP+
CHANNEL TV
CD·MD/CDR·DVD/VDP
VIDEO SELECT
SYSTEM
SET UP MENU
SELECT
RETURN DISPLAY
SURROUND
CH SELECT
VOLUME
CHANNEL
TAPE·VCR
3
0
0
2
6
7
98
2
3
6
7
1
2, 3
2
2
(Remote control unit)
After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.
1
Select the speaker whose level you want to adjust.
The channel switches as shown below each time the button
is pressed.
2
Adjust the level of the selected speaker.
FL CNTR FR SR SL
SW
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
B
2 1
STATUS MUTING
T.TONE
MASTER
VOL
TITLE
DISC SKIP+
CHANNEL TV
CD·MD/CDR·DVD/VDP
VIDEO SELECT
SYSTEM
SET UP MENU
SELECT
RETURN DISPLAY
SURROUND
CH SELECT
VOLUME
98
2
3
6
7
1
2
2
NOTE: Please make sure the AUDIO position of the slide
switch on the remote control unit.
NOTE: Please make sure the AUDIO position of the slide
switch on the remote control unit.
The level of the selected speaker can be adjusted within
the range of +12 to 12 dB using the SELECT (up and
down) buttons.
Default setting of channel level is 0 dB.