Filter
Top Products
Adjusting the Treble Level:
To adjust the treble level:
1. Press the Menu key on the CD panel or remote
to show Menu functions on the display.
2. Press the Menu key seven times, then hold to
enter the TREBLE submenu.
3. Press the Vol+ key on the CD panel or on the
remote to increase treble 1 dB per step to reach
a maximum of +10 dB. Press the
—
Vol key on the
CD panel or the remote to decrease treble 1 dB
per step to reach a minimum of -10 dB.
Note: If an AM/FM station is weak or noisy, you may
want to decrease the treble.
Equalizing Bass and Treble (EQ)
To equalize bass and treble:
1. Press the Menu key on the CD panel or remote
to show Menu functions on the display.
2. Press the Menu key four times, then hold to
enter the EQ (equalization) submenu.
3. Press +Vol or Vol
—
on the CD panel or the
remote to select one of the EQ auto settings:
Flat, Classic, Jazz, Rock, or Pop.
Clock Functions
Setting the Current Time
To set the current time:
1. Press the Menu key on the CD panel or remote
to show Menu functions on the display.
2. Press the Menu key once to select the CLOCK
submenu. (long press)
3. Press “Memory” on the CD panel or “mem/prog”
on the remote to enable the time-set function.
The hour will flash in the display.
4. Use the +Vol or Vol
—
on the CD panel or the
remote to adjust the hour
.
5. Press “Memory” or “mem/prog.” The minutes
will flash in the display.
6. Use the Vol+/
—
keys to adjust the minutes.
7. Press and hold the Menu key to leave the
CLOCK submenu. Or, if 5 seconds elapses with
no action, the display will return to normal status.
Figure 14: Time-Set Display
Setting the WAKE time
To set the WAKE time
Using the Snooze Function (Remote Control Only)
When the timer is set to function as an alarm clock,
you can use the Snooze key on your remote to stop
CD/MP3 playback for 7-minute intervals. To use the
Snooze function:
1. Press “snooze” to stop timed play. The unit will
play again after 7 minutes. Repeat as necessary.
2. Press any key on the CD panel or remote to dis-
able Snooze and turn off the unit.
Programming Sleep Time
1. Press the Menu key on the CD panel or remote
to show Menu functions on the display.
2. Press the Menu key three times to enter the
SLEEP submenu.
3. Press the Vol+ key on the CD panel or the remote
to turn sleep time OFF or to program to shut off
after playing for 30, 60, 90, or 120 minutes.
SKYFI MODULE
With the Delphi CD Audio System and your XM
SKYFi Receiver (Delphi model number SA10000,
sold separately), it’s easy to enjoy XM Satellite
Radio programming wherever you go! (Subscription
required. Visit www.xmradio.com for details.)
Set-up
For SKYFi operation*:
1. Rotate the central unit so that the SKYFi cradle
faces forward. Be sure to follow the arrows
when rotating the unit. Complete the rotation
until the unit locks in position. CAUTION: Do not
use excessive force, which could damage the unit.
2. Connect the XM antenna to the antenna jack.
The 10-foot antenna cable can be used to position
the antenna away from the Delphi CD Audio
System for optimum reception. Alternatively, the
cable may be wound around the tab on the rear of
the lower tube (Figure 15), leaving just enough
cable to reach the antenna while it is docked on
the back of the speaker housing.
7
12:00 AM
AM/PM select
Minutes
Hour
*Refer to the
SKYFi Operating Guide
for more specific information on
operating your SKYFi Receiver.
SECT ION 3
1.Press the MENU key on the CD panel or remote to
show MENU functions on the display.
2.Press the MENU key twice, then press the VOL + on
the CD panel or remote to set ALARM ON or press the
VOL - on the CD panel or remote to set ALARM OFF.
Press and hold the MENU key, then press MENU
key to set WAKE. Press MEMORY key to select
Minutes or Hour (the Minutes and Hour will flash).
Use the VOL + or VOL - on the CD panel or remote to
adjust WAKE time. After one hour of the WAKE time,
the unit will be automatically turned off, unless any
key (except SNOOZE) is pressed.
3.