Filter
Top Products
Using Your Projector 25
SATURATION—Adjust a video source from black and white to fully saturated color.
Press to decrease the amount of color in the image and to increase the
amount of color in the image.
S
HARPNESS—Press
to decrease the sharpness and to increase the
sharpness.
TINT—Press
to increase the amount of green in the image and to
increase the amount of red in the image.
DISPLAY (in PC Mode)
VIDEO MODE—Select a mode
to optimize the display on
how the projector is being
used: PC, MOVIE, sRGB
(provides more accurate
color representation),
GAME , and CUSTOM
(set your preferred
settings). If you adjust the
settings for White
Intensity or Degamma, the
projector automatically
switches to CUSTOM.
S
IGNAL TYPE—Manually
select signal type RGB,
YCbCr, YPbPr.
Z
OOM—Press to digitally magnify an image to 10 times on the projection screen
and press to reduce the zoomed image.
WHITE INTENSITY—Setting 0 to maximize the color reproduction and 10 to
maximize the brightness.
D
EGAMMA—Adjust among the 4 preset values to change the color performance of
the display.
H
ORIZONTAL POSITION—Press
to adjust the horizontal position of the image to
the left and to adjust the horizontal position of the image to the right.
VERTICAL POSITION—Press
to adjust the vertical position of the image down
and to adjust the vertical position of the image up.
FREQUENCY—Change the display data clock frequency to match the frequency of
your computer graphics card. If you see a vertical flickering bar, use Frequency
control to minimize the bars. This is a coarse adjustment.