Filter
Top Products
support.dell.com
Dell PowerEdge 2400 Systems Rack Installation Guide 1-9
Figure 1-7. Determining Where to Install the Slide Assemblies
5. Align the mounting tab on the front of the slide-assembly mounting bracket with
the notches in the rack (see Figure 1-8).
6. Push until the mounting tabs are secure in the notches on the rack and the
pushbutton clicks out.
7. Push back on the slide assembly until the mounting tabs lock into the back side of
the rack.
8. Repeat steps 5 through 7 for the other side of the rack.
Ensurethattherailsaremountedatthesamepositiononeachsideoftherack.
10.5 inches
10.5 inches
6U (10.5 inches) between
slide assemblies (drawing
is not to scale)
template