Filter
Top Products
Base Specificaons (AudioPrecision®)
(21)
Parameters Test condions Typical value
Input sensivity
RCA IN 1200W/4ohms @230VAC
XLR IN 1200W/4ohms @230VAC
SPDIF IN 1200W/4ohms @230VAC
280mV
280mV
-10dBFS
Gain AMP output 80Hz @ 1W output +48dB
Input saturaon level
RCA le or right 80Hz
XLR le or right 80Hz
SPDIF 80Hz
>2V(Hi-Level IN)
>2V(Hi-Level IN)
N/A
Noise Level
volume=0dB (MAX) @22Hz-20kHz AES17
volume=0dB (MAX)@A weighted
-61dBV (S/N Rao 98dB )
-65dBV (S/N Rao 102dB )
Output power (4Ω)
Note: SPA2400 x 2
1% THD+N @ 80Hz 230VAC
1% THD+N @ 80Hz 115VAC
1350W
1300 W
Auto ON/OFF
Auto ON sensivity
Auto OFF me
RCA Le , 80Hz
3mV
15mins
Time delay
2ms
Power amplifier
protecon
A- Short-circuit and under load protecon
B- Thermal protecon
C-Power Supply Protecon-OCP, OVP, Full Power
Protecon
A-Yes
B-Yes
C-Yes
Power Consumpon:
@230Vac/60Hz A- Standby mode
@230Vac/60Hz B- ON mode
@230Vac/60Hz C- Rated power
@115Vac/60Hz A- Standby mode
@115Vac/60Hz B- ON mode
@115Vac/60Hz C- Rated power
A- 0.95W
B- 29.5W
C- 3203W
A- 0.89W
B- 27.5W
C- 3424W
SPA1200DSP SPA2400DSP Control Panel
Weight: 4lbs 7.4lbs 0.6lbs
Dimension: 10.75”H x 9.5” W x 2.875 D 15.5625”H x 9.5” W x 2.875 D 3.5”H x 5.75” W x 1.25 D