Curtis SRCD-4400 CD Player User Manual


 
1 2
7 8 9
1
2
3
4 6
NORMAL PLAYBACK
PLAYING CD/CD-R/RW DISCS
5
Set the VOLUME Control to a low
setting.
Place a disc on the center CD/
CD-R/RW spindle, with the printed
label side facing up. Close the CD
compartment door.
Adjust the VOLUME Playback
will continue until all the tracks
on the disc have been played.
Slide the POWER Switch to
the ON position. And slide the
FUNCTION Switch to the CD
position.
The CD/CD-R/RW player will read
the table of contents on the disc
and the total number of tracks
on the disc will appear on the
CD-R/RW Track Display.
To stop playback before the disc
ends, press the CD STOP ( )
Button. The disc will stop and
the display will show the total
number of tracks on the disc.
Press the CD Door OPEN Button
to open the CD compartment door.
NOTE: If you have not already
done so, remove the CD transit
lock card from the CD compartment
now and discard it.
Press the CD PLAY/PAUSE
Button to begin playback
on Track 1.
The desired track can be played
by remote control.
After the last track has been played,
the disc stops automatically and the
display shows the total number of
tracks on the disc. If you are finished
listening , press the CD Door OPEN
Button to open the CD
Compartment door. Remove your
disc,close the CD Compartment door
Slide the POWER Switch to the
OFF position.
1
2
1 2
1
1
2
CD/CD-R/RW PAUSE CONTROL
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
FORWARD/REVERSE SKIP TRACK AND HIGH SPEED MUSIC SEARCH ( / )
2
3
During CD/CD-R/RW playback, if
you wish to Pause the disc
momentarily, press the CD PLAY/
PAUSE Button again. Playback
stops but the disc continues to spin
and the track number flashes in the
display.
After you insert the disc into the
CD/CD-R/RW player and the total
number of tracks appear on the
display, you may press either
the CD Skip Forward ( ) or
CD Skip Reverse ( ) Button to
select a specific track for playback.
During playback, press the
CD Skip Forward ( ) Button
once to advance the player to the
beginning of the next track, Press
the CD Skip Forward ( ) Button
repeatedly to advance the player
to higher number tracks.
During playback, press the
CD Skip Reverse ( ) Button
once to move the player to the
beginning of the previous track,
Press the CD Skip Reverse ( )
Button repeatedly to move the
player back to lower-number
tracks.
During playback, press and
hold either the CD Skip Forward
( ) or CD Skip Reverse ( )
Button to move the player forward
or backward within a track to
locate a specific musical passage.
The player will move forward or
backward at high speed as long
as the button are depressed.
When you release the
CD Skip Forward ( ) or
CD Skip Reverse ( ) Button,
normal playback will resume at
that point.
When the desired track number
appears in the display, press the
CD PLAY/PAUSE Button.
Playback will begin on the track
you selected.
Press CD PLAY/PAUSE
button again CD/CD-R/RW
resume normal playback.
-10-
-11-
1
REPEAT
CD REPEAT CONTROL
REPEAT playback During CD/
CD-R/RW playback, if press
REPEAT button the first time, it
will repeat play the present track
and the REPEAT indicator will
flashes in the display. If you press
second time is to Repeat play all
tracks and the REPEAT indicator
will stop flashes in the display.
If you press third time is for
cancelling it and the REPEAT
indicator will disappear in the
display.