Filter
Top Products
XLS Series Power Amplifiers
Operation Manual Mode d'emploi page 19
Amplificateurs de puissance
Bedienungsanleitung
Leistungsendstufen
Manual de Operación
Amplificadores de potencia
Figure 3.2 Back Panel Controls
and Connectors
Figure 3.2 Commandes et
connecteurs
Abb. 3.2 Rückseite:
Regler und Anschlüsse
Figura 3.2 Controles y
conectores del Panel Trasero
3.3 Back Panel Controls
and Connectors
H. Power Connector
I. Circuit Breaker
Provides overload protection.
J. Balanced XLR Inputs
Two 3-pin female XLR input connectors are provided (one per
channel).
K. Mode Switch
Selects Dual or Bridge-Mono operation.
L. Fans
Provide front-to-back forced airflow for cooling.
M. Binding Post Output Jacks
One pair per channel; accept banana plugs or bare wire. Note:
Binding post outputs on European models come with safety
plugs installed to prevent European power-cord plugs from
being inserted. The side entry positions for these connectors
should therefore be used with European models.
N. 4-Pole Speakon
®
Output Connectors
These two connectors accept 2-pole or 4-pole Speakon
®
connectors. See Figures 2.8, 2.9 and 2.12 and Tables 1, 2 and
3 for connector wiring. The top Speakon
®
connector is wired
for both channels so it can be used for bridge-mono wiring or
for stereo wiring of two speakers to a single Speakon
®
con-
nector.
3 Operation 3 Utilisation
3 Bedienung
3 Operación