Crown Audio I-T5000 HD Stereo Amplifier User Manual


 
I-Tech HD Series Power Ampli ers
Operation Manual
page 37
4.8.18 Signal Generator
Both channels share a noise generator that allows
noise to be mixed into the audio signal. This is useful
for noise masking applications and testing. Each
channel has the following controls:
Noise On/Off: Turns the noise generator on or off.
Noise Type: Selects full-spectrum white noise or
pink noise.
Noise Level: Sets the noise level with a fader.
The sine-wave signal generator lets you mix a
single tone into the audio signal. Its controls are listed
below:
Sine On/Off: Turns the sine-wave generator on or
off.
Sine Frequency: Sets the frequency anywhere
from 20Hz to 20kHz.
Sine Level: Sets the level of each channel’s sine-
wave signal independently.
The noise generator and sine-wave generator cannot be
used at the same time.
4 Advanced Operation