Filter
Top Products
I-Tech HD Series Power Amplifi ers
Operation Manual
page 29
4.8.5 Source Confi guration
In this screen you can confi gure the levels and settings of the
analog, AES and CobraNet inputs. The input signal of each channel
can be independently muted.
The I-Tech HD amplifi er can be set to work as a fi xed gain amplifi er:
any input signal is given a fi xed amount of gain, either 26dB or
32dB. In addition, you can set the input sensitivity to determine how
much gain is provided. See Section 4.8.20 for more details.
4.8.6 CobraNet Advanced Settings
In the CobraNet Advanced Settings screen you can set the
parameters shown here. Indicators that are green can’t be
modifi ed.
The latency on this screen is the CorbaNet transport latency or
buffering. This latency must be set to the same latency as the
source CobraNet device.
The Foldback control panel lets you select the items to
transmit via CobraNet. Selections available are the Analog
Inputs, Amplifi er Outputs or AES input signal. The audio can
be routed out through only one bundle.
4 Advanced Operation