Filter
Top Products
Recording Cassettes to CD
Recordable
ReWritable
FUNCTION EQ
MONO/STEREO BAND
MUTE
LINE IN EARPHONE
SPLIT TRACK/
CD PAUSE
REPEAT PROGRAM
STAND BY OPEN/CLOSE
POWER
ERASE
VOLUME
DOWN UP
FINALIZE
CD RECORDER
PM
MHz
KHz
AM
FM
MW
SENSOR
1
2
3
4
5
6
7
8 9 10 11 12 13 14 15
22232728
29 30
2526 24
21
20
19
18
17
16
5 10
CD Recording Operation
Recording Records to CD
Control Locators
Unit Controls
1 Speakers
2 Band Button(AM/FM)
3 Mono/Stereo Button
4 Mute Button
5 Split Track/CD Pause Button
6
Record Button
7
Line In Jack
8 CD Drawer
9 Tuning Down Button
10 Erase Button
11 Tuning Up Button
12 Volume Knob
13
Stop Button
14 Finalize Button
15 Play Button
16 Headphone Jack
17 Power Button
18 Stand By Button
19 Open/Close
Button (CD Door)
20 Program Button
21 Repeat Button
22 Preset Up Button
23 Preset Down Button
24 Stand By Indicator
25 LCD Display
26 Sensor
27 EQ Button
28 Function Button
(CD/PHONO/RADIO/AUX)
29 Cassette Eject/Fast Forward
30 Cassette Door
31 Hold Down Clip
32 Turntable Suspension Screw
33 Cue Lever
34 Tone Arm Rest
35 Speed Control Switch
36 Tone Arm
37 Turntable
Preparation
This unit is designed to record CD-R and CD-RW
discs bearing the identification logo Compact Disc
Recordable or CD-Rewritable. If CDs do not
conform to this standard, they may not record
properly.
NOTE:There is no video output when it is recording.
1 Load a compatible blank CD-R or CD-RW into
the unit.
2 Press the FUNCTION button (28/58) to set the
unit to Phono mode.
3 Load a pre-recorded cassette tape into the
cassette player. Make sure to get the cassette
to the point in which you want to start the
recording.
4 Once the cassette is ready and playing, press
the CD RECORD button (6/56) to begin
recording.
5 Once the first side of the cassette is finished,
press the STOP button (13/77).
6 Eject the cassette tape and flip it over to the
other side.
7 Once it begins playing, press the CD RECORD
button (5/56) again to resume recording.
8 Once you have finished the recording, press the
FINALIZE button (14/55). FINAL will show on
the display and Finalize will flash during the
process.
9 Once the CD has been finalized, the display will
show F DONE. The CD is now finalized and
ready for use.
NOTE:If the CD is not finalized, it will not play in any
other CD player.
1 Load a compatible blank CD-R or CD-RW into
the unit.
2 Press the FUNCTION button (28/58) to set the
unit to Phono mode.
3 Set the SPEED CONTROL SWITCH (35) to the
correct speed (33 1/3, 45 or 78 rpm) for the
selected record.
4 Use the CUE LEVER (33) to raise the tone arm
off its rest. Move the tone arm over the record
and use the cue lever to lower it to the point you
want the recording to start.
5 Press the CD RECORD button (6/56). Record
will flash on the LCD. The CD will begin recording.
6 Once the first side of the record is finished, press
the STOP button (13/77). R Done will be shown
on the display.
7 Turn the record over and repeat steps 4-6 to
record the other side.
8 Once you have finished the recording, press the
FINALIZE button (14/55). FINAL will show on
the display and Finalize will flash during the
process.
9 Once the CD has been finalized, the display will
show F DONE. The CD is now finalized and
ready for use.
NOTE: If the CD is not finalized, it will not play in any
other CD player.
CD Recording Operation
Recordable
ReWritable
FUNCTION EQ
MONO/STEREO BAND
MUTE
LINE IN EARPHONE
SPLIT TRACK/
CD PAUSE
REPEAT PROGRAM
STAND BY OPEN/CLOSE
POWER
ERASE
VOLUME
DOWN UP
FINALIZE
CD RECORDER
PM
MHz
KHz
AM
FM
MW
SENSOR
31 32 33
35
36
34
37