Filter
Top Products
Getting Started
Getting Started
Unpacking
1. Remove packing material from the unit.
Note: Save all packing materials.
2. Remove radio and all accessories.
4. Remove the protective plastic covering the radio and all accessories.
Set Up
1. Unwind the AC/DC power adaptor.
2. Plug AC end into appropriate outlet.
3. Plug the small end of the adaptor into the 12v Jack on the back of the unit.
4. Connect the FM antenna to the FM antenna jack on the back of the unit.
5. Connect the AM antenna to the External AM quick connectors.
6. Remove protective battery tab from remote control.
Getting Started
Unpacking . . . . . . . . . . . . . . . . . .3
Set Up . . . . . . . . . . . . . . . . . . . . . .3
Control Locators . . . . . . . . . . . .4-5
Display . . . . . . . . . . . . . . . . . . . . .6
Connector Locators . . . . . . . . . . .7
Basic Operation
Unit Controls . . . . . . . . . . . . . . .8-9
Clock Setup . . . . . . . . . . . . . . . . .9
Audio Setup . . . . . . . . . . . . . . . .10
Contrast . . . . . . . . . . . . . . . . . . .10
Factory Restore . . . . . . . . . . . . .10
Radio Operation
XM Radio
XM setup . . . . . . . . . . . . . . . . . .11
Listening to XM Radio . . . . . . . .11
AM/FM Radio
Listening to AM/FM Radio . . . . .11
Station Presets
Programming Stations into
Memory . . . . . . . . . . . . . . . . . . . .11
Alarm
Alarm Setup . . . . . . . . . . . . . . . .12
Sleep and Snooze Setup . . . . .13
Battery Back-Up . . . . . . . . . . . . .13
Portable Audio Ready
Auxiliary Input . . . . . . . . . . . . . . .14
Auxiliary Output . . . . . . . . . . . . .14
General
Troubleshooting Guide . . . . . . .15
Warranty Information . . . . . . . . .17
Table of Contents
3
cr224Manual.qxd 9/22/06 11:35 AM Page 5