Filter
Top Products
Note: The type of reception bands, the frequency
step, and the upper and lower limits of the
receiving frequency are dependent on the
specifications of the different areas.
1 Press the TUNER button on the control panel
to enable the tuner.
2 Once in tuner mode, press the TUNER button
again to select the desired band (FM/AM).
3 To change stations, push the FORWARD SKIP
button to scan up, or the BACKWARD SKIP
button to scan down. This radio is also equipped
with an auto search function, which will
automatically tune in to available stations. To
use this function, simply press and hold the
FORWARD SKIP or BACKWARD SKIP button
(about 1 second) until the display starts searching
for stations. Now the radio will stop on the next
station that it can tune in.
Note: If the FORWARD or BACKWARD skip
buttons are pushed during autosearch,
the searching will stop at that point.
4 To manually search for a station, push the
FORWARD or BACKWARD skip button one
press at a time until the desired station is found.
5 In FM mode, there will be a “stereo” displayed
on the LCD when a station broadcasting in stereo
is received.
Presetting Stations
AM/FM Tuning
1 You can store up to 20 FM stations and 12 AM
stations into the preset memory.
2 To program a preset, begin by tuning the radio
to a desired station by using either auto or manual
search.
3 Once a desired channel is located, press the
MEMORY button one time. You will see (--)
flashing on the right side of the display.
4 Press the REPEAT button to select the desired
preset number. The preset number will increase
by one each time it is pressed. Example: The
first time the REPEAT button is pressed, you
will see a “1”. Press the button twice and a “2”
will display. The number you select will be the
number of the preset for the selected station.
5 Press MEMORY one last time and the selected
station is stored.
6 Repeat steps 2 - 5 until all desired stations have
been programmed.
7 Once all of the desired stations have been
programmed, press the REPEAT button to select
presets.
8 Do not turn off the power. This will erase all the
presets.
Broadcasting station in AM
AM
KHz
FM
MHz
STEREO
Stereo reception
AM
KHz
Search a desired station
TRACK
MEMORY
Choose track 4
AM
KHz
CH
Choose Channel 1
AM
KHz
CH
Channel 1 presetting finish
8
Radio