Filter
Top Products
11
1 In CD mode with a CD inserted and play stopped,
press the MEMORY button one time.
2 Select a track you would like to program by using
the FORWARD or BACKWARD skip buttons.
3 Once you have selected a track, press the
MEMORY button once more. That track is now
stored in the memory.
4 You can program up to 16 tracks in the memory.
Repeat steps 1 - 3 to program selected tracks.
5 When all desired tracks are programmed, press
the PLAY/PAUSE button to start playback. The
programmed tracks will play in the order in which
they were programmed.
6 To clear the programming, press the MEMORY
button one time and then press the STOP button
one time. This will clear the programming. The
programming will also be cleared if the CD
drawer is opened, the power is turned off, or if
the radio is unplugged.
Optional External Speakers
1 With your new radio, you have the option of
adding external speakers.
2 The speaker jacks for external speakers are
located on the back of the radio. Along with the
speaker jacks is a switch labeled int./ ext. When
using external speakers, this switch must be
switched to the ext. position. Doing this turns
off the internal speakers in the radio and redirects
the power to the external speakers.
3 If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
Programming Your CD Player
TRACK
Program input mode
MEMORY
TRACK
MEMORY
Choose track 4
TRACK
MEMORY
Program input complete
CD Player & Connecting Optional Equipment