Filter
Top Products
Crestron C2N-TFM FM Radio Tuner
Operations Guide - DOC. 6233A FM Radio Tuner: C2N-TFM • 17
This section describes a sample SIMPL Windows program that includes a
C2N-TFM.
Configuration Manager is where programmers “build” a Crestron control system by
selecting hardware from the Device Library. In Configuration Manager, drag the
PRO2 from the Control Systems folder of the Device Library and drop it in the
upper pane of the System Views. The PRO2 with its associated communication ports
is displayed in the System Views upper pane.
PRO2 System View
The System Views lower pane displays the PRO2 system tree (refer to the following
graphic). This tree can be expanded to display and configure the communications
ports.
Expanded PRO2 System Tree
C2Net Device Slot in Configuration Manager
To incorporate a C2N-TFM into the system, drag the C2N-TFM from the Cresnet
Control Modules | Cresnet Audio Modules folder of the Device Library and drop it
in System Views. The PRO2 system tree displays the C2N-TFM in Slot 9, with a
default Net ID of 56 as shown in the following illustration.
NOTE: For convenience, the C2N-TFM symbol includes an AM Tuner Controls
slot for integrated configurations. If your system does not include the AM/WX
Tuner, simply ignore the AM Tuner Controls inputs and outputs in your program.
NOTE: The first C2N-TFM in a system is preset with a Net ID of 56 when its
symbol is dragged into the upper pane of System Views. Additional units are
assigned different Net ID numbers as they are added.