Creek Audio CD50 mk2 CD Player User Manual


 
6
CD50 mk2 Compact Disc Player
If the CD is deeply scratched, too dirty, or not recorded to Sony/Philips ‘Red Book’ standards, the disc may not play. If
an improperly centered disc is played, noise will be heard in the mechanism. Avoid using such discs.
Some discs of poor manufacture may not be readable or may skip. Check another disc should this occur.
Some discs will take longer to read the T.O.C. if they have a lot of tracks, i.e. more than 25.
STANDBY
When switching-on from Standby, with no disc in the tray, the
display will show no dISC.
If there is a disc in the tray the track display will show dISC
until the T.O.C. (table of contents) has been read.
When the T.O.C. has been read, the information will be
displayed, i.e. the total number of tracks and total playing
time.
INSERTING A DISC
Press the OPEN/CLOSE button on the front panel or DISC
on the handset, the disc tray will open and the OPEN sign
will be displayed.
Insert the disc and press the OPEN/CLOSE or DISC button
again to close the tray.
The disc will start spinning and the total number of tracks will
be read. The disc will then stop and the display will show the
T.O.C. (table of contents), being the total number of tracks
and the total playing time.
Press the STOP button. The disc will stop playing, the
PLAY symbol will disappear and the track indicator will
show the total number of tracks. The time indicator will display
the total playing time.
TO PLAY A DISC
Press the PLAY button. The disc will start playing.
The track number 1 will be displayed, together with the
PLAY symbol and the elapsed time of the track being
played.
TO STOP DISC PLAY